Fabricante de joyería en moissanita y plata S925 — OEM/ODM, venta al por mayor y marca propia.

Fabricación y Calidad

Micropavé, proceso químico de chapado, AQL 2,5 y ensayo de tracción: cómo se comprueba la calidad de las joyas de moissanita S925.

25articles In this category
62total del pedido Published guides
Nov 2026 Latest update
16yrs Manufacturer since 2010

All articles

25 posts
Fabricación y Calidad

Cuando un lote falla EN 1811: rechapado, reensayo y dónde está la línea de descarte

Short answer: Sometimes, but not on the same evidence. A failed EN 1811 batch can be stripped and re-plated when the nickel comes from the coating system itself: a nickel strike or underplate, a contaminated plating bath, or a coating that is too thin at an edge. It should be scrapped when the nickel sits ... <a title="When a Batch Fails EN 1811: Re-Plating, Retesting, and Where the Scrap Line Actually Is" class="read-more" href="https://amarajeweiry.com/es/en1811-failed-batch-replate-or-scrap/" aria-label="Leer más sobre When a Batch Fails EN 1811: Re-Plating, Retesting, and Where the Scrap Line Actually Is">Leer más</a>

Fabricación y Calidad

Anillo S925 ensayado a 91,8% de plata: la regla 4/1000, la tolerancia de soldadura y cuándo reclamar

At 91.8% silver, an S925 ring is three parts per thousand away from two different verdicts. Under 15 U.S.C. § 296, a 925 mark allows a 4/1000 deviation on the solder-free silver, so the floor is 921‰; at 918‰ the ring fails by 3/1000 and the result supports a claim. If the laboratory assayed the ... <a title="S925 Ring Assayed at 91.8% Silver: The 4/1000 Rule, the Solder Allowance, and When to Raise a Claim" class="read-more" href="https://amarajeweiry.com/es/s925-assay-918-silver-tolerance/" aria-label="Leer más sobre S925 Ring Assayed at 91.8% Silver: The 4/1000 Rule, the Solder Allowance, and When to Raise a Claim">Leer más</a>

Fabricación y Calidad

Grabado láser de su marca junto al sello 925: reglas de ubicación, plazo de entrega y coste por unidad en una serie de 10.000 anillos

Short answer: On a 10,000-unit S925 ring run, laser etching your brand name adds days rather than weeks, and a small per-piece charge once the mark file and fixture exist – but placement is a legal decision before it is a design one. Under the National Gold and Silver Stamping Act, 15 U.S.C. § 297(b), ... <a title="Laser Etching Your Brand Name Next to the 925 Stamp: Placement Rules, Lead Time, and Per-Unit Cost on a 10,000-Ring Run" class="read-more" href="https://amarajeweiry.com/es/laser-etching-925-hallmark-lead-time-cost/" aria-label="Leer más sobre Laser Etching Your Brand Name Next to the 925 Stamp: Placement Rules, Lead Time, and Per-Unit Cost on a 10,000-Ring Run">Leer más</a>

Fabricación y Calidad

Bronce Asomando Bajo S925 Chapado a los Tres Meses: la Prueba de Recepción, la Cláusula del OC y Quién Paga

Direct answer: Bronze showing through a plated S925 chain three months into retail is not proof of wearer abuse, and it is not automatically a plating defect either. Color alone cannot separate the two, because a silver sulfide film reads yellow-brown before it reads black, while a brass substrate that was marked 925 reads bronze ... <a title="Bronze Showing Through Plated S925 in Three Months: The Receiving Test, the PO Clause, and Who Pays" class="read-more" href="https://amarajeweiry.com/es/reclamacion-por-defecto-de-chapado-quien-paga/" aria-label="Leer más sobre Bronze Showing Through Plated S925 in Three Months: The Receiving Test, the PO Clause, and Who Pays">Leer más</a>

Fabricación y Calidad

Contrastes del Reino Unido y la UE para Joyería de Plata S925: las Cuatro Marcas, la Oficina de Contraste y el Expediente que su Comprador Espera

Short answer: A US or EU retail chain will not review an S925 silver line until four folders exist: commercial documents (licence, tax ID, insurance, NDA), a compliance pack (third-party test reports for nickel release, lead, cadmium and REACH or CPSIA limits), quality records (AQL inspection results, fineness and plating data), and UK/EU hallmarking evidence. ... <a title="UK and EU Hallmarking for S925 Silver Jewelry: The Four Marks, the Assay Office, and the File Your Buyer Expects" class="read-more" href="https://amarajeweiry.com/es/huella-britanica-y-de-la-ue-para-plata-s925/" aria-label="Leer más sobre UK and EU Hallmarking for S925 Silver Jewelry: The Four Marks, the Assay Office, and the File Your Buyer Expects">Leer más</a>

Volver arriba
¿Necesita cotización rápida? Hable con nuestro equipo de exportación por WhatsApp.